Brick Bond Types and How They Work
There are a lot of reasons why you should look into masonry and maybe you’re here to read this article so that you can have brick bonds installed at your house. Here’s an article with an overview of brick masonry. This type of masonry is done with bricks put together or bonded together with mortar. There are a lot of varieties of mortar, one of which is mud mortar which is commonly used.
Usually these types of bricks would want to get the same area or atleast sizes that are almost similar to each other in order for it to work. The uniformity of the size of the bricks is what makes it look better and even. The idea of the design repetition is the main goal and it will look better and clean. Here are some of the types of bricks:
- Running Bond – this is also known as the stretcher bond. This type of brick bond is very easy to build and the brick that can be categorized as simple.
- English Bond – this is a type of alternating bricks on of which it’s alternating between headers and stretchers. This type of bonding is commonly used to build stronger walls.
- Header Bond – this one is done with over lapping the half of the brick over the built one. This type of bonding is used to build thicker brick walls.
- Flemish Bonds – there are 2 types of Flemish bonds. One is a single Flemish bond and the other is a double Flemish bond.
- Stack Bond – in this one all of it is just loaded in plain and held with mortar with it being perfectly in line with each other.
- Dutch Bond – this one is done in cross bonds in which it is done in alternates of headers and stretchers.
- American Bond – this one is done similar to English bond. It is also called common bond wherein there is a header every 5 to 6 courses and centered with the previous header course.
- Facing Bond – This one is done by following thick walls. There is diversity in the thickness of this bond.
- Diagonal Bond – this one is best used if the brick wall is in 2 to 4 brick of thickness and is normally done on the 7th or even the 5th course along the vertical upward of the wall.
- Rat Trap Bond – this one the bricks are laid in the edge and are placed in a vertical position there is a hollow space and this keeps the interior cooler and as well as the outside. There is extra labor needed to carry out this design.
If you want to have this type of brick bond or is in need of a repair Chilliwack Masonry can assist you on your masonry or masonry repair needs. Just visit Chilliwack Masonry’s website to learn more about this brick bonding and if you have questions for them you can message them regarding their rates products and services.
Major Causes of Drywall Damage
For a homeowner, repairing drywall can be a stressful task. While you do not have to repair the damage on your own, you still have to worry about it from reoccurring.
Waking up only to find out that one of your walls has begun to fall apart due to an unexpected water leak is one of the sorrows of owning a house.
Damage in the drywall is problematic. Sometimes, it is hard to fix and a lot of homeowners aren’t prepared for it. You should immediately contact a Chilliwack drywall professional to inspect it and fix it if you notice buckling, cracks, or holes in the walls.
Here are the major causes of drywall damage:
Plumbing Leaks
Water damage is one of the leading causes of damaged drywall. You might run into a few common problems further down the road if your plumbing has been installed properly or is older. Water damaged drywall will be the result of this.
Immediately check and fix the damaged water line that might be hidden in that area if you notice bulging in your drywall. After that, you should patch or replace the drywall.
Poor Fastening
Your drywall was most likely attached using a joint fastening tape when it was installed. The thick tape can loosen due to age or moisture as time goes by. This will begin to clasp the drywall that it is holding together. You can clearly notice it in your walls if this ever happens.
If you see nails popping through the wall, then it is quite clear that your drywall was installed poorly. This occurs whenever the nails in your drywall are not firmly set in the stud.
Do not hammer the nail back in place if you see one popping through. Before you nail it back to its place, it is ideal to get rid of it and look for the stud yourself.
Cracking
If your drywall is poorly installed, cracks can occur. Oftentimes, it happens in ceilings. You should definitely call a professional to come and fix the damage the moment you notice a crack.
It’s a safety concern whenever you have cracked drywall. You should inspect your roof if you see cracks that happen more often. It can also be often caused by your home settling.
You should not neglect to crack. It will only get bigger and can turn into an extremely costly and stressful repair.
Termite Damage
For a lot of homeowners, termites are a huge problem.
Contact an exterminator immediately if you see termite damage. You can identify this type of damage by wood damage, damaged paint, a hollow sound whenever you strike the wall, and pinholes.
Holes
Holes are some of the most obvious drywall damage. It is considered a structural problem if you see any kind of hole in the wall. It can be a result of a lot of things. So, you have to ensure to get the holes patched and fixed as soon as you can if you see your drywall has holes.
Tips for Hiring the Right Drywall Contractor
Drywalls have been well received by people (especially in the construction field) due to smooth characteristics. They are used for ceilings and interior walls. They are pricey in cost that’s why people would want to spare additional expenses by performing DIY installation. The thing is, drywalls are not the friendliest to handle.
Most people fail to install them properly. This leads to uneven walls and distorted ceilings. It’s best if this difficult-to-handle material will be entrusted to the hands of Aurora drywall contractor. They have the technical know-how; hence, the installation results will be flawless.
But hiring them will hurt our pockets as their professional rate is indeed high. Be sure to bring bang in your buck by following these tips on how to find the right drywall contractor. The tips are divided into three phases- looking; interviewing, and making the contract
1st phase- Look Up
Consider three ways when looking for a drywall contractor. First, you can ask through referrals from friends. This is by far the most reliable as your friends will give their honest feedback from the contractors they’ve dealt with. We know you’ll consider those contractors who impressed your friends because most likely they will replicate the same good service. Second, you can look through associations of drywall contractors. There is still assurance of good service even if there is no recommendation from your friends.
Remember that their membership requires them to be legitimate. They must have certification and business permit to operate. Third, you can search for drywall contractors on the internet. This is by far the most convenient as you’ll only have to type in keywords for your search; then you’re good to go. There’ll be uncertainty though because fly-by-night contractors are also present in this platform.
After searching all possible contractors in your area, narrow them down according to your factors (like feedback, affiliation with drywall contractor groups, and certification) and proceed to interview.
2nd phase- Interviewing
Know what to ask when doing the interview with your selected contractors. The right questions can lead to hiring the right drywall. Here are some of those:
1. What would be the suggested start date of this project? What would be the estimated finish date?
2. Will there be a dedicated team that would assist you?
3. What’s your payment schedule?
4. What would be the best way to contact you?
5. How did your previous clients react to your finished work?
6. Do you have a license to operate?
The goal here is to remove any firms that might not be able to face the demands of the project. Don’t worry if you sound offensive in your questioning. A professional drywall contractor should understand that your main priorities at this moment are your walls and ceilings. Only efficient contractors should do the job. As soon as you have determined the right contractor for your project, go now to making the contract.
3rd phase- Making the Contract
The contract between drywall contractors (first party) and you (second party) should cite important details. First of which is the actual price with its corresponding items. It must be stated with clear language. In this manner, you’ll know what are the inclusions of the actual price. The contract should also note a full description of drywall services to be rendered.
Furthermore, it should indicate the schedule of payment. While down payment is okay, full payment before completion of the project is not. Lastly, most people tend to forget this but it is necessary for you to put terms of termination as a just-in-case measure.
Recent Comments